Ball Valves
Features
Diameter
DN6-DN150 (1/4” – 6”)
Connection Forms
Welded, Tri Clamped
Connection Norms
ASME, DIN, SMS, ISO
Body Material
316L
Sealing Material
EPDM, PTFE
Interior Surface Smoothness
Ra MAX<0,51 μm
Maximum Temperature – Pressure
130°C – 13,8 bar
Certification
FDA, USP Class VI, 3.1
Mode of Control
Manual, Pneumatic
Butterfly Valves
Features
Diameter
DN6-DN150 (1/4” – 6”)
Connection Forms
Welded, Tri Clamp, Threaded,
Connection Norms
ASME, DIN, SMS, ISO
Body Material
316L /304
Sealing Material
EPDM, PTFE, Silicone, Viton
Inner Surface Smoothness
Ra MAX<0,8 μm
Maximum Temperature – Pressure
150°C – 10 bar
Certification
FDA, USP Class VI, 3.1
Form of Control
Manual, Pneumatic
Centrifugal Pumps
Features
Max Capacity
300 m3/h
Connection Forms
Tri Clamped, Welded, Threaded
Body Material
316L
Sealing Material
WoC/WoC/EPDM
Inner Surface Smoothness
Ra MAX<0,6 μm
Maximum Temperature – Pressure
200°C – 11 bar
Certification
FDA, USP Class VI, 3.1
Check Valves
Features
Diameter
DN15-DN80 (1/2″ – 3″)
Connection Forms
Welded, Tri Clamped
Connection Norms
ASME
Body Material
316L
Sealing Material
PTFE, Silicone
Interior Surface Smoothness
Ra MAX<0,51 μm
Maximum Temperature – Pressure
150°C – 0.09 bar
Certification
FDA, USP Class VI, 3.1
Clamp Seals
Features
Diameter
DN6-DN150 (1/4” – 6”)
Connection Forms
With Cheeks, Without Cheeks
Connection Norms
ASME, DIN, SMS, ISO
Material
EPDM, PTFE, Silicone, PTFE/EPDM, PTFE/Viton, Viton
Certification
FDA, USP Class VI
Clamps
Features
Diameter
DN6-DN150 (1/4” – 6”)
Connection Forms
Klempli
Connection Norms
ASME, DIN, SMS, ISO
Body Material
304, 316
Envizion
Features
Diameter
DN6-DN50 (1/4” – 2”)
Connection Forms
Welded, Tri Clamped
Connection Norms
ASME, DIN, SMS, ISO
Body Material
316L
Diaphragm Material
PTFE/EPDM
Interior Surface Smoothness
0,25 μm Maksimum Sıcaklık – Basınç
165°C – 13,8 bar
Certification
FDA, USDA, ASME BPE, USP, 3.1
Mode of Control
Manual, Pneumatic
Flowmeters
Features
Diameter
DN25-DN80 (1” – 3”)
Capacity
2 – 1,200 lt/minute
Connection Forms
Tri Clamp, Threaded
Connection Norms
ASME, DIN, ISO
Body Material
316L
Inner Surface Smoothness
Ra MAX<0.51 μm
Maximum Temperature
150°C
Certification
3.1
Heat Exchangers
Features
Design
Straight or U pipe – Double Walled
Tip
Instantaneous or quantity based
Objective
Heating, cooling or heating+cooling
Body Material
316L
Sealing Material
PTFE
Inner Surface Smoothness
Ra MAX<0,51 μm
Maximum Temperature – Pressure
200°C – 10 bar
Certification
FDA, USP Class VI, 3.1
Hose Tails
Features
Diameter
DN6-DN50 (1/4” – 2”)
Connection Forms
Clamp
Connection Norms
ASME, DIN, SMS, ISO
Body Material
316L
Inner Surface Smoothness
Ra MAX<0,51
Polishing
Mechanical polishing
Certification
3.1
